Charger Aki Intelligent AD2012 Garansi Full Spare Part

Nilai tambah dari charger aki intelligent sebagai berikut : 

1. 3 Tahap pengisian pintar/ 3 Stage Mode Battery Charger

Soft Start, Bulk, Absorption, Float, Untuk artikel 3 tahap pengisian pintar akan dibahas lengkap pada artikel terpisah

2. Float stage charger/Auto cut off, Jika aki sudah full maka otomatis tidak mengisi namun tetap melakukan maintenance pada battery agar battery lebih awet

3. Bisa untuk 4 jenis aki mobil yang beredar dipasaran, Aki Kering, Aki Basah, Aki Gel, Aki Kalsium.  Masing masing aki berbeda voltagenya untuk pengisian yang lebih baik maka dari itu terdapat switch agar disesuaikan dengan aki anda. Misal anda menggunakan aki basah maka float voltage yang sebaiknya adalah 13,5V dan Untuk jenis aki kering maka float volatgenya yang tepat adalah 13,8VDC. dan aki Gel berada ditegangan 13,2VDC

4. Tidak membuat air aki mendidih, Air aki basah yang mendidih dapat membahayakan sehingga dirancang voltage yang tepat untuk aki namun tetap tidak membuat air aki mendidih

5. Proteksi Pemasangan Terbalik Tidak Rusak

6. Bisa pilih charger 10Ampere dan 20 Ampere

7. Bisa bekerja di tegangan 180VAC-260VAC, hal ini untuk mengatasi listrik PLN Di Indonesia  yang sering naik turun tegangannya sehingga charger tidak mudah rusak

8.  Dilengkapi proteksi over load, proteksi, proteksi short circuit, proteksi reverse polarity, proteksi over temperatur, Proteksi output over voltage, Auto Operation Fan

9. Dilengkapi 7 Lampu Indikator, Float, Power, 10A, Battery reverse, Bulk, Fault, ABS

10. USB Charger 500mA

11. Auto Operation Fan

12, Sekring untuk pengaman tegangan tinggi

Buatan asli Taiwan dan Pabrik di Taiwan telah menerima  
Sertifikasi ISO 9001:2008/Sistem Manajemen Mutu
sehingga Quality controllnya terjamin

Garansi Full Spare Part 2 Tahun, Garansi Servis 5 Tahun

Jika anda menginginkan produk charger aki kualitas bagus maka charger aki intelligent diatas ini cocok untuk anda
Berikut Spesifikasi Terbari dari Charger Aki Intelligent :

Spesifikasi charger accu

Description :

This series of switching mode 3 stage (IUoU) chargers is designed for wet, sealed (RVLA), calcium-calcium, gel in both SLI (car) and deep cycle type of lead acid batteries.

It has 3 selections of bulk (with absorption) charge and 3 float charge voltage making a total of 9 combinations of charging profile. This is to ensure a safe, fast and complete charge as required by different types batteries.

It also has a soft start bulk charge at about 50% of full rated current when battery has been depleted to less than 10.5V open circuit voltage to give a gentle initial charge for deeply exhausted batteries.

The 10A and 20A Model AD-2012 have auto operation fan, they also have dual output banks for charging two batteries simultaneously.

In addition to the standard short circuit, over temperature, reverse polarity protections, it has an OVP (output over-voltage protection) to ensure complete protection of your battery.

Features :

**   3 Stage (IUoU) Switching Mode Battery Charger

**   3 Selectable Bulk Absorption Charge Settings

For Gel ,Wet and Calcium-Calcium lead acid battery.

**   3 Selectable and independent Float Voltage Settings

A total of 9 combinations of adaptive 3 Stage Charging profiles for all types of VRLA (sealed)

and Wet lead acid, SLI (car)  and Deep Cycled lead acid battery.

**   Battery can be connected to charger indefinitely.

**   Automatic Soft Start Bulk Charge for deeply exhausted battery

To ensure safe and gentle charging of heavily depleted deep cycle battery and car battery.

**   LED indicators for Bulk, Absorption, Float, Fault and Power-On.

**   Dual Banks for simultaneous charging of two batteries.

Two positive charging outputs.

**   Selectable Charge Current 10A/20A               

**   Power On Off Switch

**   Auto operation Fan

**   Protections to the charger

Short Circuit, Over Load, Over Temperature, Reversed Polarity (circuit & fused).

**   Protection to the battery

The OVP protects the battery from excessive over- voltage at the charger output.

**   Wide Input Tolerance for fluctuating mains voltage

It operates well from 180V to 260V.

Specifications :

DC OUTPUT MODE :                                                                         10A                             20A

AC Input Voltage 180-260V, 50Hz~                                             Yes                                       Yes

AC Input Current at full load at 230Vac                                     1.2A                                      1.8A

Output (Charge) Voltage Selections :

Absorption Voltage for AGM/GEL battery (14.1V to 14.3V)        Yes                                     Yes

Absorption Voltage for WET battery (14.6V to 14.8V)                  Yes                                    Yes

Absorption Voltage for Calcium- Calcium battery (16.2V to 16.4V)   Yes                                 Yes

Float Voltage 1 (13.2V)                                                                   Yes                                       Yes

Float Voltage 1 (13.5V)                                                                                   Yes      

https://www.tokopedia.com/maxindostore/charger-aki-otomatis-intelligent-taiwan-12v-10-amp-dan-20-amp